Redexim Charterhouse Rink SP950 Pedestrian Top Dresser

The self-propelled Rink SP950 is powered by a 6.5hp engine. The weight of the unit is evenly distributed over 6 wheels in order to minimize ground pressure and maintain manoeuvrability. The easy to load hopper handles a range of materials for both natural and synthetic turf pitches such as top dressing sand, rubber crumb infill and sand infill. All materials are evenly spread thanks to the adjustable gate & brush.

Stehr SBF 24-6 Dust Free Soil Stabiliser

Achieve dust-free spreading, cutting and irrigation in one step. The encapsulated combination Stehr soil stabilisation cutter SBF 24 with binding agent spreader SBS solves a problem in soil stabilisation: Lime or cement are very effective as binders, but also relatively aggressive. This often makes soil stabilisation near residential areas, road traffic, parking cars and airports impossible, especially in windy weather. Using this Stehr Soil Stabiliser, the binding agent is applied and mixed into the soil dust free. A separate, cost-intensive spreader vehicle is no longer required. A specially developed on-board computer means binder and water quantity can be precisely introduced and documented. The high energy efficiency, economical fuel consumption as well as low pollutant and noise emissions always play a major role in the Stehr machines. With over 50 % less fuel compared to conventional machines, payback is achieved by the fuel savings alone. Hydraulically driven rotary vane feeder. Filling via filler cap (0.8 x 0.8), screw conveyor, big-bag or standing silo. Blow-in device with shut-off valve for silo vehicles. Level control: optical with electronic sensors (full and empty display).

DAF CF 85 360 Tipper Truck

Our 8 wheel tippers are available on a self-drive or operated basis and rental can be arranged for both short and long term hires. Our DAF tipper wagons for hire include: Steel tipping body Easy sheet Vishay on board weigher Reversing camera Manual gear box Steel suspension Day cab 

Komatsu D61PXi Automated Crawler Dozer

Our intelligent Komatsu dozer for hire delivers automated dozing from rough cut to finish grade using its integrated 3D Global Navigation Satellite System (GNSS) and Machine Control system. The factory installed cab top GNSS antenna, an enhanced inertial measuring unit (IMU+), and stroke sensing hydraulic cylinders are robust and accurate. They eliminates the daily hassles of installing and removing antennas and cables from the blade, and the wear associated with it. The Komatsu EU Stage IV engine is productive, dependable and efficient. With ultra-low emissions, it reduces environmental impact and delivers a superior performance to help reduce operating costs.

Wiedenmann Terra Spike GXi 8 Verti Drain

The Wiedermann Terra Spike Aerator is perfect for deep aeration and the removal of compaction up to a depth of 10”. It has a central tine and depth adjustment with integrated damping system meaning it can be altered to suit your requirements. Whether you maintain a golf course or football field this machine is suited to your needs. Regular deep tining and deep aeration are important requirements for healthy root growth. After decompacting the ground, the roots can penetrate deeper into the soil and make better use of water and nutrients. This improves water flow and airflow in the soil, eliminating thatch and improving the strength of the grass. This machine simplifies your turf maintenance and sets new standards in speed, productivity, and quality of work, saving up to 60% of the time you previously spent on maintenance.

Amazone KE 3000 Super Rotary Harrow

This KE rotary harrow is superbly suited for soil tillage after the plough and mulch sowing on pre-cultivated soils. The strong frame, one piece rotor head and shaft and a sprung tine fixing result in a very robust implement. The large clearance between the tines and above the rotor heads ensures the free passage of large amounts of straw or clods of soil.

SCH Deep Mounted Slitter

This deep mounted slitter includes nine heavy duty slitter 'stars' on 50mm steal axles complete with bearing bolts to the carrying frame. Up to 125mm slits can be achieved in suitable conditions. Extra weight may be added if required. 

SCH Combination Turf Groomer

This three point linkage mounted combination turf groomer is a multi tasking unit that is used to groom sports pitches prior to use or at the finish of play. The leading star shaped slitter bar pierces the surface to increase drainage and the brush and rake bars tickle over the surface to enhance the quality and appearance of the area. The rear roller then firms up the surface and gives that much sought after striping. All three tools can be adjusted by individual screw jacks for depth and pressure. A weight tray is incorporated in the design to allow a top weight to be added if required. If not in use, the tray also acts as a useful general purpose carrier. 

Kilworth RotoBurier 226PM Stone Burier

The RotoBurier P series is a heavy-duty stone burier designed for use behind larger tractors. It is ideal for creating a stone free seedbed over larger areas as it can bury stones and debris to a maximum depth of 230mm. It has a heavy-duty rotor and blades with oil filled bearing hubs along with hydraulic depth adjustment and hydraulic levelling board adjustment.

Campey Turf Care Koro by Imants Top Drain 1000

The Koro by Imants Top Drain 1000 is a complete one-pass surface drainage system and a smaller version of the 1500 model.   The TopDrain 1000 is a unique multi-functional machine that trenches, removes spoil, injects sand and re-compacts all in one operation. Designed for sportsfields and golf course fairways, the TopDrain benefits include; material and labour savings, faster processing times and less surface contamination than conventional methods. The sand grid created by the Top Drain complements existing drainage systems.

Iseki TM3185

The Iseki TM range of compact tractors are great all-round machines for both private and professional users.  The TM3185 is Iseki’s most compact tractor with a 16hp engine, four-wheel drive, power steering and compact dimensions, making it the ideal workhorse for restricted environments. The 4-wheel drive and differential lock ensure solid traction, even on slopes while the simple construction and easy engine access enable you to make the daily maintenance easier. High comfort seat and mounted operator platform make working with the TM range a pleasurable task. Optional front loader available.

Iseki TM3265

Iseki's compact tractor TM series for both private and professional users has been redesigned with versatile features while improving the superior performance. The 3-cylinder engine gives you the power to offer a better response in difficult field conditions and the front and rear axles can respond to various field conditions with wet disc brake built in the rear axle. The 4-wheel drive and differential lock ensure solid traction, even on slopes while the simple construction and easy engine access enable you to make the daily maintenance easier. High comfort seat and ISO mounted operator platform make working with the TM range a pleasurable task.

Iseki TLE4490

The TLE 4490, the latest addition to the Premium Economy Iseki range. It features a 46hp 4-cylinder diesel engine, F8/R8 synchro shuttle transmission, rear PTO 540 rpm, 1 x auxiliary valve, 3‐pt linkage with 1,200kg capacity at the ball ends and 1,100kg at 24 inches. The Iseki TLE can work hard and efficiently in narrow and small spaces with its compact body and in wider areas where productivity is key. Optional accessories include a second auxiliary valve, mid‐PTO and draft control.

Iseki TG6370 Compact Tractor

Iseki’s TG Series sets the benchmark for compact tractor performance. Designed and manufactured in Japan, the TG Series is built to exceptional standards of quality; starting from the front lights through to the back three-point linkage. Every component, including the engine and transmission, features Iseki’s stamp of approval for quality and excellence that is rarely seen in the mini tractor market. The economical 3-cylinder, turbo diesel engine with 40 hp automatic PowerShuttle gearbox can be 2WD or 4WD and is available in two versions - 12 front / 12 rear gears and 24 front / 24 rear gears. The maximum speed is 34.3km/h. The capacity of the linkage system is 1270 kg and the cabin design provides excellent visibility and comfort. This tractor is very suitable for intensive work in fruit and vegetable gardens, as well as in livestock farms. The tractor is compact in size and comes with a high level of standard equipment. This range also has a host of features to choose from. The Iseki TG6370 provides unrivalled reliability to get the job done fast, efficiently and in comfort.

Iseki SF235 Commercial Cut and Collect Rotary Mower

The Iseki SF high performance range of out-front rotary mower collectors are designed to facilitate grass cutting in the most difficult areas. The height of cut can be easily adjusted from 25-120mm without the use of tolls, using the single height adjustment. It has an impressive 90 litre, turbine driven, high-tip collector that has a clearance height of 2125mm, providing superior access when depositing the cut grass into waste skips, collector trucks or bins.

Wiedenmann Terra Spike XP8 210 Verti-Drain

The Wiedenmann Terra Spike is used to achieve deep aeration and remove compaction to a depth of up to 12”. It is predominantly operated on golf greens, fairways and sports pitches. If high productivity and easy use are important criteria when selecting a machine to be used, the Terra Spike is the ideal implement. The tine working depth and tine entry angle can be quickly and easily adjusted using the QuickSet which is the central, tool-free adjustment crank. This allows you to easily and quickly alter the working depth and angles, regardless of which tine length is mounted. The tine entry angle can be adjusted from 90° to 65°. The 3-speed gearbox also allows you to precisely set the desired hole spacing according to the respective driving speed. The adjustment of both tine depth, entry angle and hole spacing means the optimal spiking intensity with regard to ground conditions and the extent of soil compaction can be achieved.

Iseki SXG323LD Compact Cut and Collect Ride-on Mower

The Iseki SXG 323 offers power, performance and unsurpassed productivity. A 48” (1.22m) mower deck provides a superior quality of cut and the large capacity, high torque 1123cc diesel engine is powerful and fuel efficient. The ergonomic design, increased leg room and dial-in height of cut adjustment all provide excellent operator comfort with the automotive-style instrument panel giving clear information, including a fuel gauge.

Shelton Sand Placement Hopper

The Shelton Sand Placement Hopper is ideal for placing free draining sands over piped drain runs and narrow drainage channels.The hopper may also be used for topping-up drainage trenches that have settled. The weight of the Sand Placement Hopper is carried by the tractor and rear roller with the spring-loaded skirt maintaining the correct operating pressure to ensure turf damage is minimised. The depth of sand is adjustable to suit different specifications and a hydraulically operated internal agitator ensures a consistent flow of material. The hopper is fitted with twin rakers and two consolidating wheels ensuring the sand is firm and level.

Shelton 6T Fast Flow Gravel & Sand Hopper

The award winning 6 tonne Fast-Flow Hopper ensures fast, clean and efficient back-filling of drainage trenches with both gravel and sand offering high daily outputs to keep up with modern trenching equipment. Aggregate material is fed from the main hopper to a secondary hopper, these are interchangeable to switch between gravel and sand. They have 150mm (6’’) of lateral movement, minimising the risk of damage to the trench sides. The secondary sand hopper features rakers and presser wheels ensuring good consolidation of sand into the trench. The 700mm (28’’) wide low ground pressure tyres ensure minimal damage to fine turf.

Kirpy NS25-7 Ripper

This extremely robust implement is designed for deep scarification and the ripping of rocky ground. It can be used as a ploughing substitute and also prepare stony soils before aligning, crushing, picking. It’s extremely strong frame allows continuous work in every kind of soil.

Blec BV130 Stone Burier

The BV130 is part of the compact range of blecavators and can be used on 20-40 hp tractors. This specialist ground preparation machine can be used to caring out the following 5 operations in one pass: Cultivation down to a depth of up to 180mm Pulverisation of the soil to a fine tilth Buries rocks, overgrowth and debris Levels and rakes Rolls to leave a firm surface      

Blec LG2400 Laser Grader

The BLEC Laser Grader is designed for contractors who demand a quality, strong and accurate grader to cope with demanding conditions. This model is fitted with twin Danfoss proportional valves and a rear 4-wheel frame, with each pair of wheels controlled independently for dual grading. The grader comes complete with ripping tines and is set up to accept any make of laser equipment.

Case Skid Steer 410 Loader

The Case Skid Steer 410 provides mighty power and massive torque to push through the toughest site conditions. The gear type hydraulic pump ensures plenty of hydraulic power for breakout, lift and attachments. Available to hire with loading bucket, scraper, brush, snow plough and planer making it a very versatile machine.

Marshall ST2550 Tanker

The robust design and huge carrying capacity of the Marshall ST2550 Tanker ensures it can tackle the most demanding jobs. The is the largest LGP tanker in the Marshall range with a massive carrying capacity and the benefit of cut out mudguards to accommodate larger tyres. The 750/60 - 30.5 tyre provides fantastic floatation on soft ground and significantly reduces the damage done to the ground by the tanker. The tanker has an integral chassis design to reduce stress on the tank and is constructed from 6mm steel. The ST2550 is fitted with hydraulic brakes and high-level dual lights, which are fully integrated. This ensures it is safe to operate and complies with all current health and safety legislation. The swivel type drawbar hitch is also fitted to reduce hitch wear and help protect the tractor operator in the event of a tanker rollover. The tank is also fitted with a standard 6” side valve that is interchangeable with another rear mounting position, allowing flexibility when loading. The standard 10000L Hertell pump provides quick and efficient loading of the tanker, while combining reliability and durability.

Iseki SF370 Out-front Rotary Mower

The SF370 is designed for demanding professional applications, combining rugged reliability and efficiency with a powerful engine to ensure an excellent cut and finish to lawn areas. The unique parallel floating design ensures an even cut over rough, rolling terrain while a very high blade tip speed gives an excellent cut and finish.

Kilworth Dragone MTL160 Flail Mower

The Dragone MTL Flail Mower is a professional machine designed for constant commercial use on grass areas and scrub land. It is built to the same engineering standards as the heavy-duty V series but is lighter for smaller tractors. Flails are mounted in a spiral around the rotor tube for a smoother drive and a finer finish. The forged steel hammer flails give an excellent finish on grass but have sufficient weight to tackle heavier growth on scrub land. The machine is fully enclosed for safe operation whilst allowing cut grass to exit easily. The rear roller which is adjustable to suit the height of cut has side anti-scalp skids and a mulching bar is integrated inside rotor.

Manitou M30-4 Rough Terrain Forklift

The Manitou M30-4 is a rough terrain forklift truck designed for extreme handling conditions. This vigorous, reliable forklift comes equipped with 4 wheel drive and is ideal for off road use. Our rough terrain forklifts can be fitted with chalwyn valve, spark arrestors and a hydraulic trailer towing hitch complete with hydraulic braking system making them ideal for use on chemical plants and industrial sites.

AFT Whiz Wheel 55 Wheel Trencher

Powerful and rugged, the AFT Whiz Wheel trencher is designed for the installation of intensive sportsturf drainage systems. A wide range of options allows you to tailor the 55 to suit your needs. Available on an operated basis only.

AFT Whiz Wheel 75 Wheel Trencher

The AFT Whizz Wheel 75 offers the ultimate solution for installing and maintaining intensive drainage and irrigation systems - the undisputed leader in its class. The AFT 75 is capable of both digging and grading main drains up to 750mm deep and 125mm wide together with gravel banding or sand slitting as narrow as 50mm. Available on an operated basis only.

AFT 100 Chain Trencher

The AFT tractor mounted trencher is a rugged and powerful trencher designed to fit onto the three-point linkage of tractors. The AFT 100 has been constructed in a modular form to suit a wide range of options to suit a great variety of jobs. It can be used for agricultural drainage, sports turf drainage and pipe and cable laying. The trench widths can be easily adaptable from 125mm to 200mm  Available on an operated basis only.

Blec Harley T8 Power Box Stone Rake

The versatile and time-tested Harley Power Box Rake allows you to soften, level, mix and grade allowing you to get the job done within the quickest time. It is great for use on hard and compacted infield material, trench restoration and golf course construction. The roll-back barrier allows you to quickly react to soil moisture conditions and choose the size of material you want to leave in the seedbed. Raising the barrier promotes faster soil drying and opening up of muddy sites. The independently adjustable gauge wheels allow for skim passes for over-seeding and the pure carbide teeth are specially shaped to ensure the best possible seedbed sub-base fracture pattern and superior moisture retention.

Blec Harley T6 Power Box Stone Rake

The unmatched productivity and versatility of the Harley Power Box Rake makes it an extremely popular, time tested tool for cultivation. It allows you to soften, level, mix and grade and is engineered to keep time consuming labour to a minimum. It is great for use on hard and compacted infield material, trench restoration and golf course construction. The roll-back barrier allows you to quickly react to soil moisture conditions and choose the size of material you want to leave in the seedbed. Raising the barrier promotes faster soil drying and opening up of muddy sites. The independently adjustable gauge wheels allow for skim passes for over-seeding and the pure carbide teeth are specially shaped to ensure the best possible seedbed sub-base fracture pattern and superior moisture retention.

BV230 Blecavator Stone Burier

The Blecavator BV230 is the answer to all your ground preparation needs. This one pass the machine buries stones, cultivates, levels and rolls leaving the area ready to seed. The optional extra of a mounted grass seed hopper also makes this cultivator a one pass machine, saving you time and money.

Müthing MU-FM 160 Front Mounted Flail Mower

This out-front flail mower is manufactured from high quality QSt/E Steel for mounting onto professional front mowers with a 2-point linkage. The optimised distance between the outer rotor circle and the support roller guarantees perfect contour following and an even quality of cut whilst the shredded material is spread evenly behind the support roller.

Bomford Elite Turbo Euro 250 Flail Mower

The Turbo Mower is built with durability and ease-of-use in mind, with a hydraulic offset, fitted roller and side skids.

Low Level Single Axle System Scaffold Trailer

Developed with the scaffold industry in mind, our low level single axle system scaffold trailer ensures efficiency in the safest way possible. The standard specification includes rear lighting, hydraulic brakes and a handbrake. The handbrake can also be fitted with sacrificial breakaway cable, should the trailer become detached from the towing vehicle.  For advice and further information on safe towing of trailers please do not hesitate to contact us.

20ft Tandem Axle Flatbed Scaffold Trailer

Developed with the scaffold industry in mind, our Tandem Axle Flatbed Trailer ensures efficiency in the safest way possible. The standard specification includes rear lighting, hydraulic brakes and side sockets which can be used to fit removable poles for extra security when transporting loads around site. The handbrake can also be fitted with sacrificial breakaway cable, should the trailer become detached from the towing vehicle.  For advice and further information on safe towing of trailers please do not hesitate to contact us.

McCauley GP 16 Ton Dump Trailer

Due to its distinctive wide base these trailers can be used for multiple applications; from the movement of loose materials to the transportation of small plant.

McCauley 14 Ton Dump Trailer

The McCauley 14 ton tapered body dump trailer is widely used by the farming and construction industries for easy movement of heavy debris, aggregates and landfill. Due to its distinctive wide base these trailers can be used for multiple applications; from the movement of loose materials to the transportation of small plant.

Tube and Fit Tandem Axle Scaffold Trailer

Designed primarily to safely transport conventional tube & fit scaffold, this trailer includes rear lights, hydraulic brakes and a handbrake that can be fitted with a sacrificial breakaway cable which will apply the brakes should the trailer detach from the towing vehicle.  For further information on trailers and safe towing please contact us.

Tandem Axle System Scaffold Trailer

Developed in line with the scaffold industry, our Tandem Axle System Scaffold Trailer ensures efficiency in the safest way possible, even if your using quick to erect Layher and Alustar systems. Our system scaffold trailers complement the conventional tube and fitting trailers CLS Selfdrive have supplied for over 10 years. This trailer comes with under chassis toolboxes and pull out none slip walkways, along with a front storage box on the headboard.  The standard specification also includes rear lighting, hydraulic brakes and handbrake which can be fitted with sacrificial breakaway cable should the trailer become detached from the towing vehicle.  For advice and further information on safe towing of trailers please do not hesitate to contact us.

Marshall Agricultural Flat Bale Trailer BC-32 14 Tons

The Marshall BC-32 is the largest model in our bale trailer range and provides a massive carrying capacity and excellent Marshall build quality. It has box section bearers and runners which provides exceptional strength and prevents water from prematurely rusting the trailer. The strength of the trailer is further enhanced by heavy-duty channels forming a square chassis that extends the length of the trailer and also reduces flexing when loading the trailer. Another standard feature that also helps deal with flexing when loading is the 21” headboard, which improves the overall rigidity of the trailer. The BC-32 also uses 8 stud tandem axles as standard. The standard floor on a BC-32 is a 4mm durabar floor that significantly reduces the potential for loads to move during transport. The BC-32 is the flagship model in the Marshalls range and provides customers with an efficient and flexible trailer that can meet a wide range of needs. 

Marshall Agricultural Flat Bale Trailer BC/25-12 Ton

The Marshall BC/25 - 12 ton model is an extremely heavy-duty trailer, which benefits from a hugely over-engineered chassis and improved running gear. It has box section bearers and runners which provides exceptional strength and prevents water from prematurely rusting the trailer. The strength of the trailer is further enhanced by heavy-duty channels forming a square chassis that extends the length of the trailer and also reduces flexing when loading the trailer. Another standard feature that also helps deal with flexing when loading is the 21” headboard, which improves the overall rigidity of the trailer. The BC/25 - 12 ton uses 8 stud tandem axles as standard and can either be configured with springs or split oscillating rocker tandems. The standard floor on a BC/25 - 12 ton is 4mm durabar that significantly reduces the potential for loads to move during transport. 

Iseki TM3215

This Iseki TM3215 compact tractor couples excellent performance with high efficiency. It has versatile features and superior performance making it a leader in the compact tractor market. The 3-cylinder engine gives the power to offer a better response in difficult field environments and the front and rear axles can respond to various conditions with wet disc brake built in the rear axle. The 4-wheel drive and differential lock ensure solid traction, even on slopes. The simple construction and easy engine access make daily maintenance straight forward and the floating mount reduces noise and vibration. The TM3215 also has a high comfort seat, rubber mounted operator platform which make working with this tractor a pleasurable task.

Iseki TLE3400

The TLE3400 is a 38hp tractor which has three speed hydrostatic transmission and a lift capacity of 1000 kg. It is supplied with turf tyres and an optional front loader is available.

Iseki TG6490 IQ Compact Tractor

Iseki’s TG Series sets the benchmark for compact tractor performance. Designed and manufactured in Japan, the TG Series is built to exceptional standards of quality; starting from the front lights through to the back three-point linkage. Every component, including the engine and transmission, features Iseki’s stamp of approval for quality and excellence that is rarely seen in the mini tractor market. The TG6490 features an IQ dual clutch transmission that offers the control of a manual with the convenience of an automatic. There are 8 main gears and 3 ranges. Gears are changed by simply moving the gear lever through the straight shift gate. If ‘D’ is selected then gears 4-8 are operated automatically - ideal for roadwork or towing. The TG6370 has a front loader joystick, draft control, up stop PTO and linkage up in reverse.

Iseki TG6370 IQ Compact Tractor

Iseki’s TG Series sets the benchmark for compact tractor performance. Designed and manufactured in Japan, the TG Series is built to exceptional standards of quality; starting from the front lights through to the back three-point linkage. Every component, including the engine and transmission, features Iseki’s stamp of approval for quality and excellence that is rarely seen in the mini tractor market. The TG6370 features an IQ dual clutch transmission that offers the control of a manual with the convenience of an automatic. There are 8 main gears and 3 ranges. Gears are changed by simply moving the gear lever through the straight shift gate. If ‘D’ is selected then gears 4-8 are operated automatically - ideal for roadwork or towing. The TG6370 has a front loader joystick, draft control, up stop PTO and linkage up in reverse.

Iseki TG5390 IQ Compact Tractor

Iseki’s TG Series sets the benchmark for compact tractor performance. Designed and manufactured in Japan, the TG Series is built to exceptional standards of quality; starting from the front lights through to the back three-point linkage. Every component, including the engine and transmission, features Iseki’s stamp of approval for quality and excellence that is rarely seen in the mini tractor market. The Iseki TG5390 is strong, powerful and packed with features. An efficient three range transmission offers a range selection for every application. Whether it’s slow working speeds or high road speeds, the high torque transmission delivers power to the ground when it's needed most.

Iseki SFH240 Commercial Cut and Collect Rotary Mower

The Iseki SFH240 is the ultimate high productivity mowing machine. It has great manoeuvrability with an out-front rotary deck to facilitate grass cutting in difficult areas and copes well with long grass in wet or dry conditions. It is a quiet mower when compared to other models and guarantees high performance and reliability. Two high-speed, shaft-driven blades ensure the cut grass from rear discharge cutting decks is propelled directly into the high dump 550 litre collection hopper, even in heavy or wet conditions. Powered by a 24hp liquid cooled diesel engine operating at 2600rpm resulting in reduced noise levels. 

JCB 535-95 Loadall

The JCB 535-95 Construction Loadall is a telehandler that’s designed to meet the unique demands of any site head-on. Compact dimensions, unrivalled manoeuvrability, unparalleled build quality and all-day operator comfort are just the beginning.  The JCB 535-95 is a full-sized 3-stage telescopic handler with a huge reach. It uses the JCB award-winning EcoMAX engine and sits on a chassis that’s designed for load-bearing and stability. The EcoMAX engine meets Tier 4i legislation without using a bulky DPF, which, in turn, brings benefits like great visibility, low running costs and more uptime. To increase productivity further, the machine also has a variable-speed cooling fan on 81kW engines, as well as instant steering selection between three modes.

Caterpillar D6M Low Ground Pressure Dozer

Engineered to exceed most demanding goals the D6M LGP Dozer combines power and rugged components for tough and varied working conditions. It keeps material moving with the reliability and durability you expect from Caterpillar machines. The Caterpillar 3116 engine, optimally matched with torque converter and power shift transmission, provides an excellent balance between efficiency and power.

Caterpillar D5N Low Ground Pressure Dozer

Engineered to excel on the most demanding work sites the Caterpillar D5N LGP Dozer combines power, rugged components and superior balance, for tough working conditions. The D5N keeps material moving with the reliability and durability you expect from Caterpillar machines. The machine is available for hire on a self-drive or operated basis, with or without laser heads.  

Caterpillar D5K Low Ground Pressure Dozer

The Cat® D5K Track-Type Tractor delivers superior performance and comfort while reducing your operating costs. The large spacious cab provides a comfortable work area and the intuitive seat-mounted controls are easy to use for greater job accuracy and efficiency. The innovative SystemOne undercarriage reduces maintenance time and costs and the AccuGrade Laser and GPS Systems help you get to grade faster, with fewer passes and less manpower. From the first cut to finish grade, the D5K sets the standard.

Kirpy BPS 250 Stone Crusher

The KIRPY Stone Crusher is a new generation fixed hammer stone crusher which is reliable, powerful and innovative. The BPS 250 includes a large diameter rotor, even distribution of 32 hammers, a hydraulically controlled breaker anvil and automatic belt tensioning. The machine has interchangeable soles for deep working and an automatic lubrication system.

JCB 3CX Backhoe Loader

The JCB 3CX Sitemaster is a powerful wheeled backhoe loader offering a maximum dig depth of 5460mm and shovel capacity of 1.3m3 making it a very versatile machine. The 3CX is a product of JCB’s efficient design philosophy, responding to today’s rising fuel prices and environmental concerns with class-leading efficiency and low running costs. It uses innovative technologies to squeeze the absolute maximum out of every drop of fuel.

Campey Turf Care Raycam Uni Rake

The Raycam UniRake is designed for and by leading groundsmen to accurately maintain natural and synthetic grass including hybrid surfaces. The UniRake offers high intensity grooming that can be calibrated in its severity.

Campey Turf Care Raycam Speedresser 24H

The Raycam Speedresser 24H is a 2.4m wide drop-spreader designed to handle all top dressing material. The 4 flotation tyres minimise the risk of turf damage & compaction. Ideal for golf courses & sports fields use, both with private clubs, local authorities and contractors. The Speedresser 24H requires a tractor of at least 75hp, and is PTO driven, via a heavy-duty transmission to an agitator and twin rollers. The twin rollers are now hydraulically adjustable against a pre-set stop to alter spreading rate applications. The high work rate enables the spreading of top dressings up to depths of 2mm – 75mm in one pass.

Campey Turf Care Imants Sandcat

The Imants SandCat moves lightly over the turf, slitting the surface and introducing sand to improve drainage and enhance the properties of the rootzone. The compact size being ideal for greens and tees. Used empty, it has similar features to the Imants ShockWave and can therefore be used to aerate hard, compacted areas of fine turf. The SandCat features overload protection by a torque limiter PTO shaft. The Imants SandCat is available for hire or to purchase.

Hydrema 922C Articulated LGP Dump Truck

The light Hydrema 922C off-road dumptruck is a fuel efficient, stable 22 tonne dumptruck - featuring exceptionally low unladen weight, the best performance/weight ratio on the market and extremely good off-road characteristics. A fully loaded dumptruck normally requires a hard surface on which to drive if deep wheel tracks are to be avoided. As Low Ground Pressure (LGP) Hydrema 922C is specially designed for driving on very soft surfaces, it can be fitted with extra wide tyres, which, combined with the dumptruck’s low unladen weight, makes it possible to work both early and late in the season.  

Hydrema 922F Articulated LGP Dump Truck

This 20 tonne, three axle, articulated dump truck is the obvious choice for earthmoving in soft terrain and areas demanding the lowest possible ground pressure. The Low Ground Pressure (LGP) Hydrema 922F has the lowest unladen weight and highest power to weight ratio on the market. It has unmatched stability and extremely low fuel consumption.

Campey Turf Care Koro by Imants 2500 Fieldtopmaker

The FIELDTOPMAKER® 2000 is a heavy-duty fraise mower, for removing unwanted surface matter such as poa-annua, thatch, weeds or the entire surface to a depth of 50mm. A side arm conveyor removes debris directly into a trailer, leaving a level, even surface. The FIELDTOPMAKER® 2000 is designed for sports turf applications like football & rugby pitches, turf farms, etc. Several new, optional rotors allow the FIELDTOPMAKER® 2000 to be used for a variety of different surface renovations, including scarifying, surface planing, brushing and the cleaning out of organic matter from fibrereinforced pitches. The elevator folds flat for transport.  

Campey Turf Care Raycam TB220 Turf Brush

The TB 220 is a heavy-duty, but light weight, towed brush system for brushing in top-dressing on greens and other fine turf surfaces. The brush unit is free floating, and has the option to lock-out either the front or rear brush as required. Other features include, 7 quick and accurate brush height adjustments, quick attachment, adjustable hitch height, sealed chain guards & integrated vertical storage facility. The TB 220 has a 2 year limited warranty.  

Campey Turf Care Air2G2 GT Air Inject

The Air 2G2 is a self-propelled hydrostatic drive three probe air injection machine, injecting compressed air to either 7” or 12” deep (depending upon probe fitting). This causes a fracturing effect of the compacted rootzone, with no surface disruption. Air is injected vertically and horizontally over an area of 5ft (1.5m) to 12” (30cms) deep. Self-contained three wheel, Kholer 19hp petrol engine, hydrostatic drive axle, steered by the handles, move forward or reverse. Ingersoll Rand two stage compressor. All processes automatically controlled by the push of a button, and setting of computer pad. Ideal for use on fine turf throughout the growing season with no interruption to play. Made in USA.

Campey Turf Care Imants Shockwave 155 Linear Decompactor

The Imants ShockWave for hire is a linear decompactor, designed to revitalise heavy wear areas by relieving soil compaction, improving aeration and removing surface water. The Imants ShockWave through Campey Turfcare is reputed to be the world’s fastest PTO driven rotary, linear decompactor. The ShockWave is designed for use on fine turf and sports fields. As with all ShockWave models, it features a no-chains, direct drive design, maintenance free ‘sealed for life’ bearings & no shearbolts.

Haulotte HA16PX Cherry Picker

This articulating boom has a working height of 16m. With a hydraulic differential lock, 38 cm ground clearance and four-wheel makes this cherry picker well suited for rough terrains. Full proportional controls and simultaneous boom functions improve productivity along with the positive/negative articulating fly jib with 140° movement and 180° hydraulic platform rotation.  

Heras Stormguard

Heras Stormguard is a freestanding stabilisation system, designed to provide additional windloading support, for use with Heras mesh and hoarding products. Heras Stormguard is perfect for sites that are susceptible to high winds, such as open spaces, cliff tops and sea walls as it provides extra wind resistance. The Stormguard system has been tested with both mesh and hoarding systems, and can withstand up to 100mph winds with mesh and up to 70mph winds on hoarding. This unique strut system is used with feet or blocks that help the overall stabilisation. This product can withstand wind speeds upto 100mph for mesh and 70mph for hoarding. CLS Selfdrive can provide wind loading advice and calculations to help you choose the right system for your site and this can determine the number of feet or blocks required. For site specific calculations please enquire about this product.  

Heras RB22 Crash Barrier

The RB22 Crash Barrier is a versatile yet strong, flexible one-piece system. Manufactured from prime UV stabilised polyethylene this enables easy handling with no need for crane lifting machinery. This maximum safety crash barrier has been fully tested and certified to BS EN1317 - N1 50mph making it ideal for traffic demarcation. MIRA Speed Test: 77.9mph

Heras RB2000 HD Barrier

The RB2000 HD Barrier is fully interlocking and can be filled with water or ballast. Manufactured from UV stabilised prime polyethylene, this heavy-duty barrier is suitable for low level containment such as highways. The crash barrier has been fully tested and certified to BS EN1317 - N1 50mph making it ideal for traffic demarcation. The system can also withstand wind loading of up to 71mph

Heras GB2 Heavy Duty Barrier

The GB2 Heavy Duty Barrier is a fully interlocking, water filled traffic demarcation barrier which is manufactured from UV stabilised prime polyethylene and suitable for low level containment such as highways. A pin locking device allows each barrier to have a 35 degree configuration allowing for angles and curves. The system can withstand wind loading of up to 78mph and is extremely robust.  

Heras EVO Road Barrier

The EVO Road Barrier is a fully interlocking barrier system which is produced from UV stabilised prime polyethylene and can be water or sand filled. The barrier is available in three different sizes which can be used together giving a fully versatile traffic barrier system. Creating a continuous solid wall, the barrier can be topped with mesh fencing. It is fully stackable for ease of transport and storage and has been ‘Wind Load’ tested to resist speeds of up to 55mph.  

Heras Readyhoard On-Ground

Heras Readyhoard On-Ground system is a temporary steel hoarding system. Panels are combined with feet, clips and stabilising. Hoarding is often specified or preferred which in turn can cause problems; ground systems are not always possible due to regulations or ground conditions. The Heras Readyhoard On-Ground system therefore provides the ideal solution. This reusable On-Ground system is comprised of robust box-profile steel sheets and is wind loading tested up to 70mph. All on ground systems require stabilising & ballast.

Heras Steelhoard

Heras Steelhoard is a quality re-useable temporary hoarding system. The profiled panels are galvanised and polyester coated which ensure they will not rot or degrade. The system can be installed extremely quickly and was designed to give the appearance of a continuous run. At the same time it easily accommodates changes in direction and elevation.

Heras Acoustic Barrier System

The Heras Acoustic Barrier is our latest sound absorbing innovation. Developed to combat noise pollution on construction sites, the Heras Acoustic Barrier is used to screen off noise by fitting our specially developed sound absorbing barrier quickly and easily onto our HSG151 compliant round top mesh panel. Providing a safe environment for your construction site, the Heras Acoustic Barrier also helps to demonstrate a commitment to corporate social responsibility by using a product that helps to combat noise pollution. It has been developed using a composite of fibres that both absorbs and controls noise. When noise is generated on site, the Heras Acoustic Barrier membrane will absorb noise and reduce the degree of noise pollution. Independent testing has shown that the Heras Acoustic Barrier can deliver up to a 30dB noise reduction and is great for city centre construction sites, scaffolding sites, rail and road side.

Heras Pedestrian Barrier

Our round top Pedestrian Barriers are made from a solid tubular structure making it an extremely robust pedestrian control system. The fixed leg barrier benefits from domed feet for greater crush resistance and the flat baseplate option helps to minimise trip hazards. Perfect for pedestrian control at leisure or sporting events, this product can be quickly installed with its hook and eye system and is ideal for marking out walkways.  

Heras Avalon Plastic Barrier

The Avalon is a lightweight plastic barrier made from a high density polythylene mould making it hard wearing and durable. The barrier is supplied in hi-vis orange as standard, but can also be supplied in your own corporate colours. The system benefits from a locked or unlocked mode configuration which prevents unauthorised dismantling. Heras Avalon is stackable therefore making it easy to store and transport.

Heras Strongwall Barrier

The Strongwall Barrier is an extremely robust and stable barrier system which comprises of a high density moulded top section and a coloured 18kg base barrier which is compliant with Chapter 8 street works. This system is designed to meet the demands of safe access for pedestrians. The top section can be water filled, which will add a further 15kg of stability making it ideal for windy conditions and the anti-tamper linking system, prevents unauthorised dismantling.

Heras Anti-climb Square Top Panels

 The Heras Anti-climb Panel is an improved anti-climb version of our very first creation (the Original Heras panel). The panels are available as standard or heavy duty and both benefit from Smartweld technology. Panels are available in Standard Square Top and Heavy Duty Square Top, both with close wire spacing to HSG151 guidelines.  

Heras Anti-climb Round Top Panels

The Heras Round Top panel is the strongest on the market, with 3 sides formed from a continuous length of tube, eliminating the top corner weld, often the weakest point in traditional panel design. Panels come with RFX corner plates and close wire spacing to HSG151 guidelines If you require a top of the range panel, the Heavy Duty Round Top Anti-climb panel is the one. This is now the most popular panel and has become the nation’s favourite.

Heras 151 System

Utilising the specified equipment, you will have the safest and sturdiest fencing system available. HSE has confirmed that this system meets all of the guidelines in HSG151 Publication “Protecting the Public - Your next move”. The Heras 151 System is the safest on the market providing additional security which makes it the number one system to deter thieves. The fencing system comes with a round top anti-climb panel, yellow plastic hi-vis feet, Heraslock anti-tamper coupler and anti-tamper tool.  

Heras 151 Steadfast System

The Heras 151 Steadfast System incorporates all the components of the Heras 151 system with the addition of the patented Steadfast Strut. This uniquely designed strut increases the stability of the fence and also acts as an integrated anti-lift device. The strut fits neatly into the hi-vis feet without taking up any inner working space.